Archives
Cy5 amine (non-sulfonated): Technical Guide for Sensitive La
Cy5 amine (non-sulfonated): Technical Guide for Sensitive Labeling
What This Product Solves
Cy5 amine (non-sulfonated) addresses the need for a bright, photostable molecular imaging fluorophore with a primary amino group, enabling covalent labeling of proteins, peptides, and polymers where water-insoluble dyes are preferred. The compound’s excitation (646 nm) and emission (662 nm) maxima, along with a high molar extinction coefficient (250,000 M⁻¹cm⁻¹) and quantum yield (0.2), make it suitable for sensitive fluorescence detection in research settings. Its primary amine functionality supports efficient coupling with activated esters—including NHS esters and carbodiimide-activated carboxyls—broadening its use as a fluorescent probe for protein labeling and as a flow cytometry fluorescent dye.
Due to its insolubility in water, Cy5 amine (non-sulfonated) is especially valuable in workflows that require labeling in organic or mixed-solvent systems. It is not appropriate for direct aqueous labeling or clinical diagnostic applications, as emphasized in internal guides such as this workflow article, which reviews solvent handling and labeling considerations.
Protocol Parameters
- Dye Dissolution Concentration: ≥48 mg/mL in DMSO; ≥8.84 mg/mL in ethanol | Stock solution preparation | Ensures complete dissolution before labeling | product information
- Storage Temperature: -20°C (solid) | Long-term storage | Maintains dye stability and integrity; avoid repeated freeze-thaw | product information
- Solvent Compatibility: Insoluble in water; soluble in DMSO/ethanol | Labeling reaction setup | Requires organic co-solvent for initial dissolution; add dropwise to buffer | product information
- Reaction Partners: NHS esters, carbodiimide-activated carboxyls, epoxides | Conjugation to biomolecules | Enables covalent attachment of the dye to target molecules | product information
- Recommended Buffer: Buffer free of competing amines (e.g., use PBS, avoid Tris) | Conjugation efficiency | Minimizes side reactions and maximizes labeling yield | workflow recommendation
- Labeling Environment: Non-aqueous or mixed-solvent (DMSO/ethanol + buffer) | Protein/polymer labeling workflow | Prevents dye precipitation and ensures reaction efficiency | workflow recommendation
Workflow Setup and QC Checklist
- Prepare Stock Solution: Dissolve Cy5 amine (non-sulfonated) in DMSO (≥48 mg/mL) or ethanol (≥8.84 mg/mL) to create a concentrated stock. Avoid water for initial dissolution to prevent precipitation.
- Buffer Selection: Use buffers lacking primary amines (e.g., phosphate-buffered saline) during conjugation. Avoid Tris or glycine buffers, which may compete for reactive esters.
- Reaction Setup: Add the dye stock slowly to the biomolecule solution under stirring to minimize local high concentrations and aggregation. Maintain the final organic solvent concentration below 10% (v/v) in aqueous labeling reactions for most protein systems (workflow recommendation).
- Conjugation Controls: Include negative controls (no dye, no activation) to monitor for non-specific binding or background fluorescence.
- QC Assessment: Confirm dye incorporation using UV-Vis absorbance at 646 nm and, if possible, SDS-PAGE with fluorescence imaging. APExBIO provides HPLC and NMR purity checks (≥98%) for each lot; verify lot-specific QC data where available.
- Storage: Store solid dye at -20°C in the dark. Avoid long-term storage of solutions; prepare fresh stocks as needed to retain labeling efficiency.
- Disposal: Follow institutional guidelines for organic solvent and cyanine dye waste.
For further procedural detail, see the Technical Parameters and Labeling Guide, which expands on buffer compatibility and protein conjugation advice.
Common Failure Modes and Fixes
- Precipitation During Labeling: If dye precipitates upon addition to buffer, ensure it was fully dissolved in DMSO or ethanol. Add the stock slowly with thorough mixing, and do not exceed the recommended solvent limit in the reaction.
- Low Labeling Efficiency: Check that the buffer is free of competing amines and that the dye is fresh. Use excess activated ester or optimize the molar ratio of dye to target biomolecule.
- High Background Fluorescence: Confirm removal of unconjugated dye by extensive dialysis, gel filtration, or spin-column purification post-reaction.
- Dye Degradation: Avoid repeated freeze-thaw cycles. Store aliquots of the solid dye at -20°C in desiccated, light-protected containers.
Scope and Limitations
- Non-Aqueous Labeling Required: Cy5 amine (non-sulfonated) is not suitable for workflows requiring direct dissolution in water or purely aqueous buffers.
- Research Use Only: The reagent is not for clinical diagnostics or therapeutic applications.
- Not for Direct Aqueous Labeling: Attempting to use this dye without organic co-solvent will result in poor solubility and unreliable labeling.
- Organic Solvent Compatibility: Ensure that target biomolecules tolerate the presence of DMSO or ethanol at the concentrations used.
- Photostability and Sensitivity: The dye’s photostability and high molar absorptivity are advantageous for sensitive imaging, but spectral overlap and quenching effects should be considered when multiplexing.
Conclusion
Cy5 amine (non-sulfonated) is a robust, amine-functionalized cyanine dye enabling sensitive and photostable fluorescent labeling in protein, peptide, and polymer workflows where water-insoluble labeling reagents are essential. Its handling requires strict solvent management and careful buffer selection to maximize conjugation efficiency and minimize background. For detailed workflow recommendations and troubleshooting, refer to the Technical Parameters and Labeling Guide and related resources. For product specifications and QC data, consult the Cy5 amine (non-sulfonated) page at APExBIO.